Iscar Adds Their Latest Creations To A Lengthy Line Of Flourishing Hole Generating Solutions

Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with brand new and innovative ways to boost productivity for the end user. Here is a little bit about these innovative products, and how they will serve the end user of these products.

SUMOCHAM Drills

ISCAR's new SUMOCHAM drill family is an advanced evolution of the very successful CHAMDRILL and CHAMDRILLJET drill families. The drill features twisted coolant nozzles with indexable drilling heads which are available in different head configurations for various material groups. SUMOCHAM drills can be used on milling centers or lathes.

SUMOCHAM incorporates four different standard drill head geometries, designed for optimum performance and high reliability. The drill head is made with a sharp cutting edge and polished flutes. SUMOCHAM drilling heads are offered in the diameter range of 8 to 25.9 mm. The drill head has ground flutes for smooth, constant chip flow and a ground gash for improved penetration.

The drill shank design is according to DIN 9766 standard, with available drilling depth to diameter ratios of 1.5XD, 3xD, 5XD and 8xD. All drill bodies feature coolant through holes. The accurate cylinder added to the clamping portion increases durability and reduces internal stresses. The rotation stopper planes are precisely ground, to enhance the control on the drilling head position and support, increasing tool performance and life. ISCAR's innovative SUMOCHAM drill line will furnish longer tool life and higher productivity.

DR-DH Deep Drills

DR-DH drills can obtain drilling depth-to-diameter ratio of 7XD and up. Designed to be implemented on standard horizontal milling centers, turning, and multi-task machines. Use of additional machine and setup can be avoided. They will be available as semi-standard product in a diameter range of 25.4 to 69.5 mm (1.00 - 2.73").

Two versions will be available:
A Single Flute DR-DH-31.65-0350NC-2FS is a very stiff tool complete with a patented chip gullet design. It was built for easily cut materials like cast iron and low alloyed steel.

A Double Flute DR-DH-31.65-0350NC-2FD has a double chip gullet for improved chip flow. It was designed for drilling gummy materials like non-alloyed steel and high temperature alloys.

ISCAR DEEP HOLE DRILLS

With ISCAR's brand new solid carbide deep hole drills, you can safely drill up to 22 times diameter and attain bottom10% faster than with other solid carbide drills - and six times faster than a HSS drill. This capacity can speed up a great number of high-volume operations. The deep-hole drilling station no longer needs to slow down a transfer line or stop it completely because a drill breaks.

Other target applications encompass deep holes for automotive, hydraulic blocks and die & mold work. A aggregate of features help the twist drills to cut faster, straighter,deeper, last longer and evacuate chips more readily. A specialized high-strength core creates a more durable drill point and allows for deeper flutes, enlarging the exit path for chips.

The drill tip itself has a 140 positive-point, four-margin design to maintain the edge, diminish thrust forces and aid centering and tracking. A post-coat polishing method on the flutes, margins and cutting edges decreases friction and torque that can quickly snap a drill.

The new drills are available in standard diameters ranging from 5 to 10 mm, in 20 and 22 length to diameter ratios. Special sizes are available on request. All are built of IC908, a 10% cobalt submicron carbide grade, and comes with a TiAlN PVD coating, and can be refurbished.

These are just some of the latest innovations coming from Iscar.

Iscar Offers A Completely New Line Of Slitting Cutters Using Tang-Grip Technology And The Strength Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

A Selection Of Developments In Carbide Inserts Coming From Iscar Through The Former Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.

A Number Of Improvements Have Enhanced Iscar's Line Of Indexable Endmills For Increased Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

Brand New Tools And Carbide Insert Compositions From Iscar To Better Maximize The Machining Process
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

Commercial Water Heater - Considering All Of Your Requirements - Read With Care To Know More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.

Finding Out The Best Commercial Water Heater For You Requirements
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.

Innovative Car Manufacturing Jobs To Save The Economy
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.

Are You Looking For Automotive Engineering Job Opportunities? Then Continue Reading
It is pretty clear that people who work within the car industry will be having the same monetary problems as everyone else in the world due to the economic downfall.