Original Productive Tool Holders Coming From Iscar Direct The Way In Machining Production

Iscar's Heliturn system features a unique, double-sided insert with 4 cutting edges for Fast Metal Removal (FMR) turning. The brand new Heliturn is a tangentially clamped insert having a distinctive helical shaped cutting edge, useful for tremendous depths of cut and higher than standard feed rate. The LNMX...-HT Heliturn insert is screw-clamped into the SLANR tool holder and braced by the TLN ..-HT carbide seat. This seat has ground surfaces on the top and bottom, to assure perfect contact of the insert with the tool holders. The upper rake face of this insert is mounted level with the top of the tool holder to allow chips to flow across the insert, without being afflicted by clamps or the tool holder body. The 4 curved helical cutting edges provide positive radial rake angles and soft penetration into the material being cut. The reduced forces and smaller loads establish better tool lifetime, more significant stability and the ability to use tremendously large depths of cut and larger feeds. The chipformer, deforms and breaks the chip into rib type curved fragments which can conveniently be removed from the cutting area. This insert has a frontal clearance angle of 3.7 with a 6 side clearance angle to permit machining to a 90 shoulder. Depths of cut up to .315" and facing depths to .126" at up to .047" IPR are doable with Heliturn.

When compared to CNMG/M 16... or WNMG/M 13... insert sizes with the same corner radius, much greater tool life can be envisioned when using the LNMX 1506..-HT insert. Iscar has recently released a smaller size to the Heliturn family - the LNMX 1104..R/L-HT insert and tool holder for the common application range of up to .197" depth of cut. The completely new insert features all of the benefits of the larger insert. This boosts the economical advantage in the medium machining application range. When compared to CNMG/M 43. 12... or WNMG/M 43. 08... insert sizes with the same corner radius, a significantly better tool life can be expected. The inserts are offered in .031, .047 and .063" tool nose radii. Heliturn inserts are presented in the most exceptional carbide grades: IC9025, IC3028 , IC428, IC907, and IC908.

The external tool holders are obtainable in 1, 1.25 and 1.5" shank sizes. Boring bars are presented in 1, 1.25 1.5 and 2" bar sizes. Also presented are exchangeable heads. These tool holders have Iscar's unique Hard Touch coating, which extends holder life and resists corrosion. As a result of the positioning of this insert, machining next to the tailstock is permissible.

The high positive rake angle of these cutters allows 10-15% less power usage than normal tool holders at the same parameters.

By using Iscar's Heliturn tools, massive cost savings and profitability in lathe operations is guaranteed.

A New 80 Degree Rhombic Insert with high helical cutting edge for high metal removal rates Iscar is announcing the CNMX 1207..-HTW insert family. The brand new insert has a very positive radial, helical cutting edge and a positive rake angle; a blending which considerably decreases the cutting forces. The insert's corner has a wiper configuration which provides high surface finish even at high feed conditions, which in numerous occasions can dismiss a finishing cut. The corner angle is 88 degrees which provides increased strength. The CNMX inserts were constructed for heavy machining applications. Their distinctive design ensures reputable, fast metal removal when using 80 degree rhombic inserts. They can be mounted on any regular tool holder that carries typical CNMG inserts, but the seat has to be replaced with a special seat: TCH 4. Iscar's R-clamp tool holders are highly advocated for heavy machining applications.

Corded And Cordless Power Tools - Which Are Regarded The Best?
The DIY and the construction industry or market are awash with power tools of various types and of course financial values.

Learn About Certain Safety Hints Which You Need To Keep In Mind While Working With Power Tools
Power tools are becoming a basic part of the home tool kit. They make it easier to fix problems in the home as well as to complete Do It Yourself (DIY) projects and not have to rely on professional help.

Wood Working Made Much Easier With Grizzly Tools
Woodworking is a craft that requires adequate skill and creativity. The skill of a woodworker is translated to the wood with the use of appropriate wood carving tools. One brand that is popular among Northern Tools customers is Grizzly Woodworking tools.

Saving You Hardware Headaches And Some Money: Purchasing The Ideal Cordless Drilling Machine
Whether you're an avid craftsman or an amateur just looking to fix things around the house, to buy a cordless drill can be a daunting task.

Digital Caliper -Why Has It Been Very Popular Among Every Person.
Here are some of the top reasons for considering a digital caliper. Depending on the size of your requirement you can get a caliper for about $49-100. A battery is used to power the device. It lasts and so you do not have to worry about replacing the battery.